View Parts
Additional Documents
|
The Invacare Shape Sensor with Molding Attachments give you total control. By shaping the molding bags to simulate the final cushion, you design the optimal shape for each individual. The shape is then captured and sent to Invacare for fabrication. The Shape Sensor is fitted with back and seat molding attachments and is ready to mold a ContourU cushion.
Adjustable seat depth, seat-to-back angle, and tilt-in-space provide more accurate simulation.The Invacare Shape Sensor with Molding Attachments give you total control. By shaping the molding bags to simulate the final cushion, you design the optimal shape for each individual. The shape is then captured and sent to Invacare for fabrication. The Shape Sensor is fitted with back and seat molding attachments and is ready to mold a ContourU.The Shape Sensor is transportable, allow custom seating product orders from remote locations.The unit consists of a back molding assembly, a seat molding assembly, and a base frame. By mixing and matching components, you can mold and evaluate seat and back combinations.
Back Angle: | 80° - 110°
| |
Back Molding Bag: | Back: 60 lb filled Seat: 60 lb filled
| |
Back Sensor Module: | Back: 68 lb Seat: 46 lb
| |
Dimensions: | 30.5"W x 48"L x 57"H
| |
Frame: | 50 lb
| |
Seat Tilt: | 0° - 20°
| |
Seat To Floor Height: | 23.5"
| |
NOTE: For more detail please refer to the full specifications brochure link above, or call Customer Service at (800) 333-6900. All specifications, prices, and product configurations are subject to change without notification. Accessories and seating products shown in the photographs are not necessarily included in the base price of wheelchair. Please refer to current price lists located at www.invacare.com. |
|